Payment & Shipping Terms:
|Span:||50 M||Central Strength Member:||FRP +PE|
|Water Blocking Material:||Filling Gel In Cable||Outer Sheath Thickness:||1.8-2.0mm|
|Inner Sheath Thickness:||0.8mm||Jacket:||Single PE Sheath|
Single Jacket 50 M Span ADSS Fiber Optic Cable All Dielectric Self-Supporting Aerial
Mini-Span All-Dielectric Self-Supporting (ADSS) cable's designed for outside plant aerial and duct applications in local and campus network loop architectures.From pole-to-build to town-town installations, the Mini-Span cabling system, which includes cables, suspension, dead end and termination enclosures, offers a comprehensive transmission circuit infrastructure with proven, high reliability performance. Mini-Span includes fiber counts up to 144 optical fibers and any type or combination of single-mode and multi-mode fibers with the cable. Pole-to-Pole span lengths range from 50 feet to over 650 feet (30-200meters).
. Aerial Fiber Cable Can be installed without shutting off the power.
. Excellent AT performance. The maximum inductive at the operating point of AT jacket can reach 25kV.
. Light weight and small diameter reducing the load caused by ice and wind and the . . load on towers and backprops.
. Good performance of tensile strength and temperature.
. The design life span is over 30 years.
. The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed.
. For overhead power lines under 110kV, PE outer sheath is applied.
. For power lines equal to or over 110kV, AT outer sheath is applied.
|Max. No of loose tube / filler No.||2/4||4/2||4/2||6/0||8/0||12/0|
|Number of fiber in tube||6||6||12||12||12||12|
|Gel filled in Loose tube||Yes||Yes|
|Central strength member||FRP||FRP +PE|
|Water blocking material||filling gel in cable|
|Outer sheath thickness||1.8-2.0mm|
|Outer sheath material||HDPE|
|Inner sheath material||MDPE|
|Inner sheath thickness||0.8mm|
|Cable weight (kg/km)||75||75||75||80||125||280|
|Operation temperature range||-40 ℃to + 70 ℃|
|Installation temperature range||-40 ℃to + 70 ℃|
|Transport and storage temperature range||-40 ℃ to + 70℃|
|Suitable for lines||≤35KV If the cable will be used on the more than 35KV,the Outer Sheath material must be Anti-tracking (AT)|
|Rated tensile strength (N)||3000|
|Maximum allowable tensile(N)||1200|
|Crush resistance||Installation :2200 (N/100mm) Operating :1100N/100mm|
|Minimal installation bending radius||20 x OD|
|Minimal operation bending radius||10 x OD|
Mechanical and Environmental Characteristics:
|Min. Bend Radius(Dynamic)||mm||20D(OD)|
|Min. Bend Radius(Static)||mm||10D|
Approved by various professional optical and communication product institution, KSD also conduct various in-house testing in its own Laboratory and Test Center. She also conduct test with special arrangement with the Chinese Government Ministry of Quality Supervision & Inspection Center of Optical Communication Products (QSICO). KSD possess the technology to keep its fiber attenuation loss within Industry Standards.
The cable is in accordance with applicable standard of cable and requirement of customer. The following test items are carried out according to corresponding reference. Routine tests of optical fiber