Payment & Shipping Terms:
|Elements:||Aramid Yarn And Water Blocking Tape||Jacket:||Double HDPE Sheath|
|Fiber Type:||G652D||Gel Filled In Loose Tube:||Yes|
|Operation Temperature Range:||-40 ℃to + 70 ℃||Central Strength Member:||FRP|
Aramid Yarn And Water Blocking Tape ADSS Fiber Cable With Double HDPE Sheath
All-dielectric self-supporting (ADSS) cable is a type of optical fiber cable that is strong enough to support itself between structures without using conductive metal elements. ADSS is an alternative to OPGW with lower installation cost. The cables are designed to be strong enough to allow lengths of up to 700 metres to be installed between support towers. ADSS cable is designed to be lightweight and small in diameter to reduce the load on tower structures due to cable weight, wind, and ice.
. Light weight, less additional load to tower. The maximum span can reach 1500m.
. Strong anti-pull performance, more than 90KN.
. Non metallic structure provides good insulation, excellent lightning resistant.
. Equal distribution of aramid yarns with good production process, excellent stress/strain performance.
. Excellent bullet resistant performance.
. Excellent tracking resistant performance.
. Installation wuthout power off and the normal transmission of cable won't be influenced by power line fault.
. Loose tube with non-metallic strengthen member, High flexible Aramid yarn, Can work at electric field<=25KV/m in a long period.
. Long distance telecom, LAN in high voltage area or access to telecom network;
. For power transmission system, much thunder areas and high electro-magnetic inerference.
|Max. No of loose tube / filler No.||2/4||4/2||4/2||8/0||12/0||12/0|
|Number of fiber in tube||6||6||12||12||12||24|
|Gel filled in Loose tube||Yes||Yes|
|Central strength member||FRP||FRP +PE|
|Water blocking material||filling gel in cable|
|Outer sheath thickness||1.8-2.0mm|
|Outer sheath material||HDPE|
|Inner sheath material||MDPE|
|Inner sheath thickness||0.8mm|
|Cable weight (kg/km)||134||134.5||134.9||143||168||182|
|Operation temperature range||-40 ℃to + 70 ℃|
|Installation temperature range||-40 ℃to + 70 ℃|
|Transport and storage temperature range||-40 ℃ to + 70℃|
|Suitable for lines||
≤35KV If the cable will be used on the more than 35KV,the Outer
Sheath material must be Anti-tracking (AT)
|Rated tensile strength (KN)||17.5||17.5||17.5||17.5||17.5||17.5|
|Maximum allowable tensile(KN)||6.9||6.9||6.9||6.9||6.9||6.9|
|Crush resistance||Installation :2200 (N/100mm) Operating :1100N/100mm|
|Minimal installation bending radius||20 x OD|
|Minimal operation bending radius||10 x OD|
Approved by various professional optical and communication product institution, KSD also conduct various in-house testing in its own Laboratory and Test Center. She also conduct test with special arrangement with the Chinese Government Ministry of Quality Supervision & Inspection Center of Optical Communication Products (QSICO). KSD possess the technology to keep its fiber attenuation loss within Industry Standards.
Packing and Marking:
Each single length of cable shall be reeled on Fumigated Wooden Drum
Covered by plastic buffer sheet
Sealed by strong wooden battens
At least 1 m of inside end of cable will be reserved for testing.
Drum length: Standard drum length is 3,000m±2%;